Company News

electronica 2026 Day One: Booth A4.167/1 Is Open

electronica 2026 opened this morning at Messe München, and our stand in Hall A4 — booth A4.167/1 — is up and open for the next four days. The first visitors have already been through. If you are at the show this week, here is what is on the bench and how to get something useful out of a short visit.

Where to find us

Showelectronica 2026
VenueMesse München, Munich, Germany
Hall / BoothHall A4, booth A4.167/1
Dates10–13 November 2026

What is on the bench

We brought the part of the range that people actually put on a bench — handheld instruments that have to survive a factory floor, a service van and a site visit. Everything on the stand is powered up and out of the box, not behind glass.

PanelWhat you can do at the booth
RDM-1Battery internal resistance meter and multimeter, 4-in-1 DC/AC TRMS. Bring a cell or a pack and test its health in front of you.
OM-2Dual-channel 50 MHz oscilloscope, signal generator and 8,000-count multimeter in one handheld unit. Check ripple, noise or a slow signal that a plain DMM hides.
LCR-2Handheld digital LCR meter and bridge. Bring a component and compare the reading with its datasheet tolerance.
HT256DHandheld thermal imager, 256 × 192 VOx sensor, −20 to 550 °C. Judge resolution and thermal sensitivity on a live board.
CM8811FNCoating thickness gauge, 0–1500 µm, Fe/NFe with a detachable probe.
FT036AWiFi weather station — temperature, humidity, wind speed, wind direction and rainfall, with console and online upload.
NicetyMeter stand A4.167/1 in Hall A4 at electronica 2026, Messe Munchen
Booth A4.167/1, Hall A4. The six product panels, with the instruments themselves on the shelf below.

Bring a part, not just a question

The visitors who get the most out of a trade show booth bring something with them. A component with an unknown value. A board that misbehaves only when it is warm. A photo of the panel you have to test. A copy of the standard you are being audited against.

Ten minutes with the actual object in hand settles questions that an hour of catalogue reading will not. If the part is too big or too sensitive to travel, bring the drawing, the reading you are getting and the reading you expect — that is usually enough to narrow the model down on the spot.

How to use twenty minutes well

  1. Say what you measure, not what you want to buy. “I check 400 V panels twice a year” gets you a more useful answer than “show me your insulation testers”.
  2. Ask about the standard, not just the range. The right instrument is defined by the test voltage, the accuracy class and the accessories your procedure requires.
  3. Check the consumables. Leads, clamps, fuses and probes are what actually fail in the field. Confirm they are available in your country before you commit to a model.
  4. Take a photo of the nameplate. A photo of the model and article number on the stand is faster than remembering it after four more halls.
  5. Leave with a name. If you want a quotation, an answer on lead time or a sample, ask who will follow up and when.

For distributors and partners

A good share of the conversations that start at electronica are not single-unit purchases. If you are looking at the range for a territory, these are the things worth settling while you are standing next to the product rather than by email afterwards:

  • Territory and line. Country, channel and which part of the range you would carry — the answer is different for a panel builder's supplier and for a general test-and-measurement distributor.
  • Certification files. Declaration of conformity, test reports and RoHS statements for the models you intend to list. Ask on the stand and we will tell you what exists for that model.
  • Sample and evaluation units. One unit for your own bench is worth more than a catalogue in a drawer. Bring the end-customer requirement with you and the sample discussion becomes concrete.
  • Service and spares. Leads, fuses, clamps and batteries are the parts that come back. Confirm what you can stock locally before you fix a price list.
  • Packaging and labelling. If you need your own brand, box or insert, say so early — that conversation changes the timeline.

If you cannot make it this week

The show runs until 13 November. If you are in Munich but your schedule is already full, message us and we can hold a slot at the booth — a walkthrough takes about twenty minutes.

If you are not coming at all, the instruments shown in Munich are the same ones listed on the site, and the specifications, downloads and spare parts are there all year. See the pre-show announcement for the original line-up, or write to us with the measurement you need to make and we will point you at the right model.

Booth A4.167/1, Hall A4, Messe München — 10–13 November 2026. Come and put a real part on a real instrument.

electronica 2026 Day Two: Rain Outside, Battery Tests Inside
Dauwpunt, natte bol, heat index: wat elk echt zegt

RDM-1 accu-inwendige-weerstandsmeter met multimeter

Normale prijs $57.80
Verkoopprijs $57.80 Normale prijs $0.00
Details bekijken

OM-2 handheld oscilloscoop en multimeter (50 MHz, 2 kanalen, 66 000 counts)

Normale prijs $114.00
Verkoopprijs $114.00 Normale prijs $0.00
Details bekijken

LCR-2 handheld LCR-brug (nauwkeurigheid 0,3 %, 4-draads Kelvin)

Normale prijs $78.00
Verkoopprijs $78.00 Normale prijs $0.00
Details bekijken

HT256D handwarmtebeeldcamera (256×192 IR / 2 MP zichtbaar)

Normale prijs $224.55
Verkoopprijs $224.55 Normale prijs $0.00
Details bekijken

CM8811FN laagdiktemeter (0–1500 µm, afneembare sonde)

Normale prijs $116.00
Verkoopprijs $116.00 Normale prijs $0.00
Details bekijken

FT036A-029T Wi-Fi weerstation (5-in-1 + vuilfilter)

Normale prijs $98.00
Verkoopprijs $98.00 Normale prijs $0.00
Details bekijken